- space-saving storage of tyres and rims
- special shape beams allow careful tyre and rim handling
- vertical tyre storage
- each tyre can be individually accessed
- Shelving & racking must be sufficiently secured against tip-overs if:
• the height of the top shelf in relation to the shelving depth is greater than 5:1
• shelving is equipped with hinged doors with a height/depth ratio greater than 4:1
• shelving is equipped with pull-out elements (e.g. drawers) and in the case of shelving with ladders
This modern storage solution allows you store more tyres while minimising space used
Tyre rack storage: Space-saving, innovative and easy to install
This tyre racking from BITO is designed for the standing storage of tyres, with a modular construction that allows for easy adjustments in limited space.
Whether it's summer or winter tyres and treads, it's important to provide the right shelving for proper storage when tyres are not in use. Only proper storage can ensure that tires are roadworthy and enjoy a long service life. This tire racking from BITO has been specially developed for this purpose. A generous depth of 400 mm provides ample space to store tires and rims with a diameter between 578 and 624 mm. Glossy galvanised finishes makes these shelves eye-catching, but also resistant to corrosion. These shelves can be easily assembled, with no need for screws and fixtures. Basic and more expansive models can be combined for a desirable storage solution to accommodate every need and utilise your available space perfectly. With their sleek and stylish design, these shelves make an ideal addition to any garage workshop or tyre showroom.
|Shelving height (mm)||1850|
|Useable depth (mm)||400|
|Bay width (mm)||1300|
|Number of shelves||3|
|Shelf load (kg)||150|
|bay load (kg)||800|
|External bay width (mm)||1358|
|External bay depth (mm)||424|
High load capacities are achieved through precision steel bending to ensure sufficient rigidity for realising shelving heights of up to 10 metres.
Slim 50 mm profiles contribute to maximum space utilisation.
Easy boltless assembly on site for perfect adaptation to your location.
Level spacing can be adjusted in 25 mm increments to suit your needs.
Beams and uprights form a solid force-fit connection that provides excellent lateral stability. The three location hooks of each beam connector conveniently slot into the upright perforations.
Safety pins prevent that the beam is accidentally dislodged.
Solid shelves with shelf clips - Our shelves feature box-profiled edges at the long sides and triple edge bending at the short sides.
Reinforcing lengthwise beads and pressure joined corners ensure excellent stability.
All shelves are perforated to accommodate shelf dividers.